There are two major forms of soldering in the soldering wire industry: machine automatic soldering and manual soldering; The so-called machine automatic welding refers to the use of an automatic soldering machine to achieve the welding of solder wires and components; Another type of manual welding is the process of manually feeding tin, using soldering tools such as soldering iron heads to manually operate the welding of components. These two welding methods of solder wire have their own advantages and limitations. The following is a collection of extensive information by the editor of Double Chile Solder to elaborate on these two welding methods:

一、焊錫絲的自動焊接：自動焊接必須要借助自動焊錫設備來實現，自動焊接設備可以替代重復性的的手工焊接動作，焊錫過程分為三個過程：一次送錫、預熱，二次送錫，三次送錫。自動焊錫設備焊接針對某些產品的焊接效率會有顯著提高，并減少焊錫絲浪費，多方面降低成本，焊接時烙鐵和焊錫絲均不需經由手工作業，機器作業手臂可以調整產品焊接作業時的焊接位置，有強大的送錫系統，自動、定速、定量的輸送焊錫絲，焊接溫度自動恒溫控制方式，快速回溫升溫；送錫速度、錫點大小可調，充分保證焊接質量，靈活性強，可依不同產品快速切換焊接程式。其操作起來也簡單，新手兩小時即可熟練操作，可節省50%人力。自動焊接還具有點焊、拖焊、自動清洗等多種功能，其焊接效果相比起手工焊接的優點是焊點均勻一致，品質穩定，更接近理論上的焊錫狀態，適用于焊錫各種電子元件，如電容、電阻、引腳、扁平電纜、屏蔽罩等。

1、 Automatic welding of solder wire: Firstly, automatic welding must be achieved through the use of automatic soldering equipment. Automatic soldering equipment can replace repetitive manual welding actions. The soldering process is divided into three processes: primary feeding, preheating, secondary feeding, and tertiary feeding. Automatic soldering equipment can significantly improve the welding efficiency of certain products, reduce the waste of soldering wire, and reduce costs in various aspects. During welding, the soldering iron and soldering wire do not need to be manually operated, and the machine operation arm can be adjusted to the optimal welding position during product welding operation. It has a powerful tin feeding system, which automatically, fixedly, and quantitatively transports soldering wire. The welding temperature is automatically controlled at a constant temperature to quickly return to temperature and increase temperature; The tin feeding speed and tin spot size can be adjusted to fully ensure welding quality, with strong flexibility and the ability to quickly switch welding programs according to different products. Its operation is also simple, novices can proficiently operate it in two hours, saving 50% of manpower. Automatic welding also has various functions such as spot welding, drag welding, and automatic cleaning. Compared to manual welding, its biggest advantage is that the solder joints are uniform and consistent, with stable quality, closer to the theoretical perfect soldering state. It is suitable for soldering various electronic components, such as capacitors, resistors, pins, flat cables, shielding covers, etc.

機器自動焊接

Machine automatic welding

二、焊錫絲的人工焊接即手工焊接，手工焊接適合類型繁多且生產焊接加工量較少的工廠；目前手工焊接不可替代的領域一是外殼是不耐高溫的貼片零件；二是熱敏性零件手工焊接在這些生產過程中是不可或缺的關鍵環節；手工焊接的效率比起機器焊接的會相差很大，工人焊接手法不熟練，焊接技術不到位等直接影響產品的性能、品質等。手工焊接在焊接時如果少錫易導致元件有較多的氧化物，焊接面積或高度不滿足焊接工藝標準，多錫則出現焊接面積或高度超出工藝標準；手工焊接時烙鐵溫度及焊接的溫度沒有掌握好還會出現假焊，造成間隙不良焊接現象等。

2、 The manual welding of solder wire is also known as manual welding. Manual welding is suitable for factories with a wide range of types and relatively low production welding processing volume; At present, the irreplaceable field of manual welding is that the outer shell is a non heat-resistant SMD component; Secondly, manual welding of heat sensitive parts is an indispensable key link in these production processes; The efficiency of manual welding differs greatly from that of machine welding, as workers' lack of proficiency in welding techniques and inadequate welding techniques directly affect the performance and quality of products. If there is less tin during manual welding, it can easily lead to more oxides in the components, and the welding area or height does not meet the welding process standards. If there is more tin, the welding area or height will exceed the process standards; During manual welding, if the temperature of the soldering iron and the welding temperature are not properly controlled, false welding may occur, resulting in poor welding gaps.

根據焊錫物料的不同，焊接的極限溫度有所不同，自動化機械更為智能和精準地控制焊接溫度，自動化機械則是更有效益。在機械化生產逐漸替代手工生產的環境下，人才也是各個企業爭相投入的大成本。

According to the different solder materials, the maximum temperature for welding varies. Automated machinery is more intelligent and precise in controlling the welding temperature, while automated machinery is more efficient. In an environment where mechanized production is gradually replacing manual production, talent is also a high cost that various enterprises are competing to invest in.

從以上的分析我們可以看出不管是哪種焊錫物料，自動焊接在一定條件下是優于手動焊接的，兩種焊接方式也都有其自身的優點及劣勢，下面我們通過人力成本、物資成本和產品質量這三點來對比一下：

From the above analysis, we can see that regardless of which soldering material is used, automatic welding is superior to manual welding under certain conditions. Both welding methods also have their own advantages and disadvantages. Below, we will compare them through three aspects: labor cost, material cost, and product quality:

一、人工成本對比

1、 Comparison of labor costs

人工焊接流程中人工的流動性大，會導致培訓和管理成本增加；而自動焊接設備的焊接對于人員的要求不用刻意的調換，無需培訓，直接上崗。

The high mobility of labor in the manual welding process can lead to increased training and management costs; The welding requirements of automatic welding equipment for personnel do not require deliberate replacement or training, and can be directly employed.

手工焊接中人員的培訓不當或是生熟手等差異或多或少的會造成質量的波動，故障率相對來說會高，焊錫絲焊接出來的一致性差，質量方面需要人為的干預與控制；自動焊錫設備只要設備調好，沒有效率和質量的曲線概率，沒有新手和熟練（手工）的差距等，焊錫絲焊接出來的產品質量穩定，效率穩定，可連續工作。

Improper training of personnel or differences in proficiency in manual welding can lead to more or less quality fluctuations, relatively high failure rates, poor consistency of solder wire welding, and the need for human intervention and control in terms of quality; As long as the automatic soldering equipment is properly adjusted, there is no curve probability of efficiency and quality, and there is no gap between novice and skilled (manual), etc. The product quality produced by soldering wire is stable, the efficiency is stable, and it can work continuously.

焊錫絲

Environmentally friendly soldering wire

工作里淡季和旺季時這兩種焊接方式的焊接準備效率就會更加的明顯，人工焊接會有很多的弊端，人工成本較高，熟練操作的人員招聘難度較大，而此時的自動焊錫設備可以以24小時工作，淡季不疲勞，節約人工成本。

The welding preparation efficiency of these two welding methods in the off-season and peak season of work will be more obvious. Manual welding has many drawbacks, such as high labor costs and difficulty in recruiting skilled personnel. At this time, automatic soldering equipment can work 24 hours without fatigue during the off-season, saving labor costs.

二、原材料成本比較

2、 Comparison of raw material costs

由于疫情反復，焊錫等原材料不斷上漲，利潤率空間不斷下降，競爭激烈，同質化嚴重，手工焊錫中操作不當導致的原料浪費，而自動焊錫設備的焊錫可以根據產品特點使用各種焊錫技術（如點焊，拖焊等），相比手工焊錫工藝更節省材料成本。據分析，點焊：在手工焊錫的基礎上可節約15%；拖焊：可以在手動焊錫的基礎上節省30%。

Due to the repeated outbreak of the epidemic, raw materials such as soldering continue to rise, profit margins continue to decline, competition is fierce, homogenization is severe, and improper operation in manual soldering leads to waste of raw materials. Automatic soldering equipment can use various soldering techniques (such as spot welding, drag welding, etc.) according to product characteristics, which saves material costs more than manual soldering processes. According to analysis, spot welding can save 15% on the basis of manual soldering; Drag soldering: can save 30% on manual soldering.

三、質量比較的全過程

3、 The entire process of quality comparison

手工焊錫的質量相對來說隨意性較大，不能真正實現標準化、均勻化焊錫，焊錫效果波動大。機器自動焊接出來的焊點較為均勻，同一批產品焊接出來的質量比起手工焊接品質方面要好一些。而選擇自動焊接還是手工焊接也是需要看各行各業或產品的工藝要求。

The quality of manual soldering is relatively arbitrary, and it cannot truly achieve standardization and uniformity of soldering, resulting in significant fluctuations in soldering effectiveness. The welding points automatically welded by the machine are relatively uniform, and the quality of the same batch of products welded is better than that of manual welding. Whether to choose automatic welding or manual welding also depends on the process requirements of various industries or products.

有鉛焊錫絲

Lead solder wire

不管是機器自動焊接還是手工焊接，質量好的焊錫絲也是決定其焊接質量好壞的決定性因素。目前雙智利焊錫廠家所生產的焊錫絲為原錫生產、松香芯活性焊錫絲，可以根據是手工焊接還是機器焊接調節其松香含量大小，其線徑大小、重量等均可定制，焊接出來的焊點光亮，牢固、流暢、殘留少。

Whether it is machine automatic welding or manual welding, high-quality solder wire is also a decisive factor in determining the quality of its welding. At present, the soldering wires produced by the dual Chilean soldering manufacturers are original tin production and rosin core active soldering wires. The rosin content can be adjusted according to whether it is manual welding or machine welding. The wire diameter and weight can be customized, and the welded joints are bright, firm, smooth, and with minimal residue.

雙智利焊錫廠家溫馨提示：定購焊錫絲時大家應與焊錫供貨廠家講明是手工

Reminder from Double Chilean Solder Manufacturers: When ordering solder wire, everyone should explain to the solder supplier that it is handmade

感謝您的閱讀，此文的文章來源：山東自動焊接設備更多的內容和問題請點擊：http://www.oimhc.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is Shandong Automatic Welding Equipment. For more information and questions, please click on: http://www.oimhc.com We will continue to work hard to provide you with services. Thank you for your support!