In the process of using a lot of equipment, it is inevitable that there will be some failures like this or that. In the face of such a situation, when purchasing the equipment, we should see how the manufacturers promise in terms of after-sales service. If the commitment in the after-sales service is very good, you can find the manufacturer to repair the product directly within the warranty period, which can guarantee the effect of maintenance. How to choose the suitable straight seam automatic welding equipment, the following Shandong CNC welding equipment for you to introduce:

1、選用直縫自動焊接設備的可行性分析，考慮焊接件是否標準，焊接厚度是否達到焊接要求，焊接量大小等。

1. The feasibility analysis of the selection of straight seam automatic welding equipment, considering whether the weldment is standard, whether the welding thickness meets the welding requirements, welding quantity and so on.

2、專用性較強的或是較通用一些的焊接設備，如果用戶長期只焊接一種焊接件，可以考慮考慮專用焊接設備，如果需要兼顧其它焊接件，可以考慮通用性較強的自動焊接設備。

2. For the welding equipment with strong specificity or more general use, if the user only welds one kind of welding piece for a long time, the special welding equipment can be considered. If other welding pieces need to be considered, the automatic welding equipment with strong universality can be considered.

3、堅持“適用的才是好的”原則，一條直縫焊，如果長期使用一臺6軸機械手去焊接，就有點大材小用。

3. Adhere to the principle of "applicable is good", a straight seam welding, if a long-term use of a 6-axis manipulator to weld, it is a bit overqualified.

4、對焊接工藝不了解的，可以通過試焊來檢驗焊接效果、焊接效率。

4. If you don't know the welding process, you can test the welding effect and efficiency by trial welding.

5、對于，用戶可以貨比三家，對于焊接同一個產品，如設備相差太大，可能通過對比機械配置、廠家實力、售后條款、焊接效率等方面去權衡。山東數控切割機在使用的時候，誰也沒有辦法能夠保證，這些設備在使用時不會出現一點點的問題。

5. For the price, users can compare three products. For welding the same product, if the price difference of equipment is too large, it may be weighed by comparing the mechanical configuration, manufacturer strength, after-sales terms, welding efficiency and other aspects. Shandong CNC cutting machine in use, no one can guarantee that these devices in use will not appear a little bit of problem.

而如果過了質保期以后，要看出現的是什么問題，任何產品都會有一個產品使用說明書，在產品使用的時候，*會發現一些簡單的故障，在產品說明書當中都有進行專門的介紹，可以直接來進行維修。

If the warranty period is over, it depends on what problems appear. Any product will have a product manual. When the product is used, * some simple faults will be found. There is a special introduction in the product manual, which can be repaired directly.

而如果說山東數控焊接設備出現的問題相對比較嚴重，沒有辦法能夠做出準確判斷的話，盡量還是找廠家的工作人員來維修。雖然找廠家需要支付***的上門服務費，但是它的維修上能夠得到保護。

If the problem of Shandong CNC welding equipment is relatively serious, there is no way to make an accurate judgment, try to find the factory staff to repair. Although we need to pay the door-to-door service fee of the manufacturer, its maintenance can be protected.

如果選擇的是一些其他的維修人員，對產品的了解不是特別的透徹，很容易造成設備的二次損壞，這樣的維修效果肯定是廠家不愿意接受的

If some other maintenance personnel are selected, they do not have a thorough understanding of the product, and it is easy to cause secondary damage to the equipment. The manufacturer is certainly not willing to accept such maintenance effect